Struct rustls::quic::ServerConnection

source ·
pub struct ServerConnection { /* private fields */ }
Expand description

A QUIC server connection.

Implementations§

source§

impl ServerConnection

source

pub fn new( config: Arc<ServerConfig>, quic_version: Version, params: Vec<u8> ) -> Result<Self, Error>

Make a new QUIC ServerConnection.

This differs from ServerConnection::new() in that it takes an extra params argument, which contains the TLS-encoded transport parameters to send.

source

pub fn reject_early_data(&mut self)

Explicitly discard early data, notifying the client

Useful if invariants encoded in received_resumption_data() cannot be respected.

Must be called while is_handshaking is true.

source

pub fn server_name(&self) -> Option<&str>

Retrieves the server name, if any, used to select the certificate and private key.

This returns None until some time after the client’s server name indication (SNI) extension value is processed during the handshake. It will never be None when the connection is ready to send or process application data, unless the client does not support SNI.

This is useful for application protocols that need to enforce that the server name matches an application layer protocol hostname. For example, HTTP/1.1 servers commonly expect the Host: header field of every request on a connection to match the hostname in the SNI extension when the client provides the SNI extension.

The server name is also used to match sessions during session resumption.

Methods from Deref<Target = ConnectionCommon<ServerConnectionData>>§

source

pub fn quic_transport_parameters(&self) -> Option<&[u8]>

Return the TLS-encoded transport parameters for the session’s peer.

While the transport parameters are technically available prior to the completion of the handshake, they cannot be fully trusted until the handshake completes, and reliance on them should be minimized. However, any tampering with the parameters will cause the handshake to fail.

source

pub fn zero_rtt_keys(&self) -> Option<DirectionalKeys>

Compute the keys for encrypting/decrypting 0-RTT packets, if available

source

pub fn read_hs(&mut self, plaintext: &[u8]) -> Result<(), Error>

Consume unencrypted TLS handshake data.

Handshake data obtained from separate encryption levels should be supplied in separate calls.

source

pub fn write_hs(&mut self, buf: &mut Vec<u8>) -> Option<KeyChange>

Emit unencrypted TLS handshake data.

When this returns Some(_), the new keys must be used for future handshake data.

source

pub fn alert(&self) -> Option<AlertDescription>

Emit the TLS description code of a fatal alert, if one has arisen.

Check after read_hs returns Err(_).

Methods from Deref<Target = CommonState>§

source

pub fn wants_write(&self) -> bool

Returns true if the caller should call Connection::write_tls as soon as possible.

source

pub fn is_handshaking(&self) -> bool

Returns true if the connection is currently performing the TLS handshake.

During this time plaintext written to the connection is buffered in memory. After Connection::process_new_packets() has been called, this might start to return false while the final handshake packets still need to be extracted from the connection’s buffers.

source

pub fn peer_certificates(&self) -> Option<&[CertificateDer<'_>]>

Retrieves the certificate chain used by the peer to authenticate.

The order of the certificate chain is as it appears in the TLS protocol: the first certificate relates to the peer, the second certifies the first, the third certifies the second, and so on.

This is made available for both full and resumed handshakes.

For clients, this is the certificate chain of the server.

For servers, this is the certificate chain of the client, if client authentication was completed.

The return value is None until this value is available.

source

pub fn alpn_protocol(&self) -> Option<&[u8]>

Retrieves the protocol agreed with the peer via ALPN.

A return value of None after handshake completion means no protocol was agreed (because no protocols were offered or accepted by the peer).

source

pub fn negotiated_cipher_suite(&self) -> Option<SupportedCipherSuite>

Retrieves the ciphersuite agreed with the peer.

This returns None until the ciphersuite is agreed.

source

pub fn protocol_version(&self) -> Option<ProtocolVersion>

Retrieves the protocol version agreed with the peer.

This returns None until the version is agreed.

source

pub fn set_buffer_limit(&mut self, limit: Option<usize>)

Sets a limit on the internal buffers used to buffer unsent plaintext (prior to completing the TLS handshake) and unsent TLS records. This limit acts only on application data written through Connection::writer.

By default the limit is 64KB. The limit can be set at any time, even if the current buffer use is higher.

None means no limit applies, and will mean that written data is buffered without bound – it is up to the application to appropriately schedule its plaintext and TLS writes to bound memory usage.

For illustration: Some(1) means a limit of one byte applies: Connection::writer will accept only one byte, encrypt it and add a TLS header. Once this is sent via Connection::write_tls, another byte may be sent.

§Internal write-direction buffering

rustls has two buffers whose size are bounded by this setting:

§Buffering of unsent plaintext data prior to handshake completion

Calls to Connection::writer before or during the handshake are buffered (up to the limit specified here). Once the handshake completes this data is encrypted and the resulting TLS records are added to the outgoing buffer.

§Buffering of outgoing TLS records

This buffer is used to store TLS records that rustls needs to send to the peer. It is used in these two circumstances:

This buffer is emptied by Connection::write_tls.

source

pub fn send_close_notify(&mut self)

Queues a close_notify warning alert to be sent in the next Connection::write_tls call. This informs the peer that the connection is being closed.

source

pub fn wants_read(&self) -> bool

Returns true if the caller should call Connection::read_tls as soon as possible.

If there is pending plaintext data to read with Connection::reader, this returns false. If your application respects this mechanism, only one full TLS message will be buffered by rustls.

Trait Implementations§

source§

impl Debug for ServerConnection

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Deref for ServerConnection

§

type Target = ConnectionCommon<ServerConnectionData>

The resulting type after dereferencing.
source§

fn deref(&self) -> &Self::Target

Dereferences the value.
source§

impl DerefMut for ServerConnection

source§

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.
source§

impl From<ServerConnection> for Connection

source§

fn from(c: ServerConnection) -> Self

Converts to this type from the input type.

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.